High Dream Intelligent|Combination Weigher Year-End Maintenance and Maintenance Guide, please check!
Dear Valued Customer:
Hello!
Thank you for your companionship and support in 2022. Year-end holidays necessitate cleaning and maintenance of your equipment; this is essential for the normal startup and stable operation of your machinery in the coming year. To better assist our customers, High Dream Intelligent provides you with the following guidance:
1. Thorough Equipment Cleaning
First, disconnect the power supply, then thoroughly clean the machine. Wipe clean all vibrating feeders, buffer hoppers, weighing hoppers, chutes, loading and unloading trays, and the weighing body, especially the hopper joint bearings where dust and debris easily accumulate.
To ensure the hopper doors open and close normally in the new year, please use an air gun or hot water soak to clean the corners of the hopper, then air dry and bag them, to prevent impacts and heavy pressure on the weighing hopper. 。
2. Pest Control
For exposed power and signal lines, organize them simply and wrap them with waterproof packaging film to prevent damage from rodents.
To prevent dust accumulation on the weighing body, you can also wrap it with waterproof packaging film and ensure the equipment is placed in a dry environment. Store the machine in a well-ventilated indoor environment with a temperature range of -10℃—40℃ and a relative humidity ≤85%, ensuring the indoor air is free of corrosive gases.
3. Startup Inspection and Maintenance
Before wrapping the equipment, perform a simple restart inspection to observe whether all parts of the machine are functioning normally. Then use edible oil to lubricate the joints of the hopper and check for foreign objects in the hopper hanging parts. When installing the weighing hopper, handle it carefully and gently; avoid dropping, throwing, or colliding, which may damage the sensor.
4. Post-Holiday Startup Tips
Check if the equipment is grounded, if the main power supply is normal, and if there is any damage to the signal lines of the entire equipment, and if the signal is normal.
Power on only after ensuring the lines and signals are normal . After powering on, perform a zeroing check to ensure the machine's zero point is normal. If not, use weights to perform initial calibration.
How to determine when the machine needs calibration:
After normal "zeroing," enter the manual operation interface and press "Weighing Hopper Zeroing" Check each hopper number one by one. If the weight of a certain weighing hopper is outside the range of -200g to 200g (the hopper is empty), then a 1KG weight is needed for calibration.
If the equipment fails to start normally or the weighing is inaccurate, please feel free to contact High Dream Intelligent after-sales service department.
Service Hotline: 400-1016-559
Wishing you a prosperous new year!
Related Cases